Cutting table for roller blinds UK-1 Max
Maximum cutting length: 2 500 mm

The equipment includes:

- Cutting table length 3300 mm, width 2770 mm
- Cross-cutting knife
- Pneumatic clamping line
- Material feed device

On this table you can cut:

- Fabric for the production of roller blinds;
- Different solid, thick tissues, felt;
- All kinds of textile products: carpets, rugs, runners, mats, floor coverings.
Cutting table for roller blinds consists of very rigid steel structures made of closed steel profiles. The working table top is made of laminated 25 mm chipboard. The table is protected by white powder coated aluminum on the perimeter. With the help of special screws you can adjust the height of the table and align the table horizontally. The cross-cutting knife attached to the working table top. The advantage of this cut-off range is that while cutting through the thick material is just a thin blade, not the leg of cutting knife.
Pay attention to the energy consumption of this machine: the motor that drives the circular blade is used for moving the cut-off device on the bus (1 engine performs two functions).
Another advantage is the absence of idle, (process of cutting takes place in two directions).
Pressing a button on the control box at any time you can stop cutting line e.g. to change the direction and continue cutting.

The kit includes pneumatic clamping line, which will provide a strong and stable pinning the cut material. You can adjust the clamping line by using the joystick. Working air pressure for the clamping line is 3-5 atmospheres.


Watch this film to see how the spreading machine works:

 Write review
Ad posted 60 days ago SEE LATEST ANNOUNCEMENTS
Report this ad as:
Write review
Leave your comments on this ad
Offensive messages and spam will be removed
You're not sending an SMS, type the entire word without spelling errors

Related ads